©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
106693A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Using a 10mm socket, remove license plate.
2. Remove the two plastic push pins and two bolts from
license plate location.
3. From underneath the vehicle, at the rear driver’s side
corner, unplug the bumper harness and unsnap from
vehicle frame.
4. While supporting the bumper, remove the two bumper
mounting nuts using a 16mm socket (each side).
Figure 1
Figure 2
Figure 3
