background image

©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.

 2 

106693A0

N O T I C E

EQUIPMENT DAMAGE

• 

Always

 refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details on how to wire this WARN product to your vehicle.

Read installation and operating instructions thoroughly.

  

 

C A U T I O N

MOVING PARTS ENTANGLEMENT HAZARD

Failure to observe these instructions could lead to minor or moderate injury

• 

Always

 take time to fully read and understand the installation and Operations Guide included with this product.

• 

Never

 operate this product if you are under 16 years of age.

• 

Never

 operate this product when under the influence of drugs, alcohol or medications.

Read installation and operating instructions thoroughly.

T A B L E   O F   C O N T E N T S

Tools Required .............................................................................................................................page 2

Parts List .........................................................................................................................................page 3

Torque Specifications ................................................................................................................page 3

Installation ................................................................................................................................page 4-6

Maintenance/Care ......................................................................................................................page 6

T O O L S   R E Q U I R E D

- Standard Wrench and Socket Set

- Metric Wrench and Socket Set

B E F O R E   Y O U   B E G I N

N O T I C E

This product is not compatible with factory driver assist systems such as adaptive cruise control and 

parking assist systems that have sensors or cameras installed in the bumpers or front grill area.  If your 

vehicle is equipped with any of these systems or features, consult your vehicle owner’s manual before 

installing this product.  These systems may need to be disabled as a result of installing this product.

Содержание 104823







Отзывы: