©2018 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
100837A0
I N S T A L L A T I O N I N S T R U C T I O N S
26. Install front frame brackets (A4 & A5) using hardware B6, B7,
B8 and B9. Refer to exploded view on page 3. See Figure 15.
27. Slide bumper (A1) in place and loosely attach to front frame
brackets using B1, B7, B8 and B9. Do not tighten at this time.
Figure 16.
28. With assistance, adjust bumper and tighten all hardware at
this time.
29. While holding light bracket (A2) in place (from under and
behind bumper), line up light bezel (A9) through front
bumper light port to bracket. Secure pieces together
with ten stainless steel socket head screws (B10). Review
exploded view on page 3.
30. Repeat for other side.
NOTE: Light bezels are equipped with removable panels for
lights. Lights shown installed - sold separately.
Figure 16
Figure 17
Figure 15
A4 & A5
A9
B1, B7, B8 & B9
