Warmup tempo ELT-01-XX-01, Руководство пользователя

Страница: 7 / 17

7
Welcome to the tempo thermostat
Icons on tempo
1
Rotary control
Rotate left/right to change increment
2
Rotary button
3
Program slider
4 Mode slider
5 Reset button
On reverse of the front housing
Standby
The thermostat is in standby mode and will not target any temperature. It is still
connected to mains electricity and your heating system is not isolated. Always isolate
from the mains before undertaking any maintenance.
Frost protect
The thermostat will not let the temperature fall below 5°C (41°F)
Manual mode
The thermostat will hold a fixed temperature. Just turn the rotary control to change
the target temperature.
Program mode
In this position your thermostat will run the program you have set.
If you would like to temporarily adjust the temperature, just turn the rotary control.
This will set a temporary override and will hold a fixed temperature until the next
scheduled program period.
* Periods 2 & 4 are the start times of the “Setback” temperature. The “Setback”
temperature is a lower energy efficient temperature when outside of a heating period.
If you do not require the heating on then set the setback temperature to 5°C.
1
2
3
4
Set time / day
1
2
3
4
Period 1 - Heating ON
Period 2 - Setback
*
1
2
3
4
Period 3 - Heating ON
Period 4 - Setback
*
1
2
3
4
Comfort temperature
1
2
3
4
Setback temperature
1
2
3
4
Run
1
2
3
4
1
2
3
4
1
4
3
2
The Tempo has been designed with simplicity in mind and is highly intuitive
in its programming. The sliders and simple rotary control make the setting of
the thermostat quick and easy.