WarmPool WP120, Инструкция по установке и эксплуатации

Страница: 2 / 26

~ 2 ~
Installation and operation manual WP
1. Warning
First and foremost, check the condition of your heat pump as soon as you receive it,
write any reservations you have about its state on the delivery note if you have any
doubts or a problem and send a registered letter to your installer or directly to the
manufacturer within 48 hours. After this period, no claim will be accepted.
1.1 Important information
To properly install your heat pump, read this manual carefully. We will not be liable
for any injury to persons or damage to the machine due to any errors that might occur
during installation.
-
The installation of this heat pump must be carried out by qualified personnel,
-
This heat pump meets the manufacturing and communication standards defined by
FPP's DTP10 and NFPAC,
-
The maintenance of this heat pump must be carried out as set out in this manual,
-
Only use original spare parts supplied by the manufacturer,
-
Failure to follow these instructions or the information in this manual will void the
heat pump's guarantee.
2. Your heat pump
2.1 Main features
Your heat pump must not be used for any purpose other than to HEAT your pool. Its
choice was determined following a personalized heat budget and it cannot be used for
other pools until a new heat budget has been carried out.
Your heat pump is one of the most efficient and environmentally friendly heaters,
using R32 gas.