WarmPool WP120, Инструкция по установке и эксплуатации

Страница: 9 / 26

~ 9 ~
Installation and operation manual WP
5.2 Instruction and functions of the icons

Booting and shutdown
In shutdown status, click then the unit will be booted
In booting status, click then the unit will be shut down.
NO.
Name
The button function
ON/OFF Press to start /shut off the unit
Parameter
Click this button to view the unit state and the
parameter
CLOCK
Press to set the clock, the timer on or timer off.
When the timer was starting,the button is green
Fault display
Click to view fault history
Silent setting
Click to turn on/off silent function and to set
timing Low speed function.
MODE
Click to enter mode setting and the target temp.
Setting interface
Temp.curve
Click to view the temp. and power curve
Water
Inlet Temp.
Click to enter mode setting and the target temp.
Setting interface
LOCK
Click to lock the screen Input "22" to unlock
the screen by press the "lock button"