background image

Thank you for purchasing a WarmlyYours FeelsWarm® Countertop Heater! Please read 

the following information to learn how to install and operate your countertop heater.

 

Heater Model:         Custom Adhesive-Backed Heater           Standard Adhesive-Backed Heater           Other

 

Electrical Information (please retain for future reference):

Wattage (household) 
Voltage
Approximate current draw (amps)
Current draw on household at stated voltage 120V line

Serial Number:  

IMPORTANT: USE ONLY THE POWER TRANSFORMER PROVIDED WITH THIS HEATER.  

NO SUBSTITUTIONS ALLOWED.

Your heater is specifically designed to gently raise the temperature of the heated area an additional 20 to 25 degrees 

Fahrenheit. WarmlyYours FeelsWarm® Countertop Heaters utilize slow-rise heating elements so that the heating element 

does not become excessively hot or unsafe. Consequently,  the temperature of the stone countertop may take 1 to 1 1/2 

hours to warm to the stable heat level that the heater delivers. With the optional Thermal Control Unit, the maximum 

temperature of the countertop can be lowered if needed and the heater can be quickly turned on or off. (temp adjustments 

may take 30 minutes)

Safety

: WarmlyYours FeelsWarm® Countertop Heaters are designed for indoor use only.  All WarmlyYours FeelsWarm® 

heaters utilize low voltage (9-24 volts dc) for home safety. These adhesive-backed heating elements are designed 

with ultra-high bonding adhesive to help prevent the edges of the heater from being peeled or delaminated. They are 

fabricated with an impact- and scratch-resistant cover shield to protect the heating element from damage. However, the 

heater should be inspected periodically for damage or peeling. If either is present, immediately disconnect the power 

supply and contact WarmlyYours for technical support.  Do not pull on the electrical cord connecting the heater to the 

power supply.

Warranty

: WarmlyYours FeelsWarm® Countertop Heaters come with a two-tier warranty against manufacturer defects. 

The warranty does NOT cover damage due to  tampering, improper wiring or installation, use of incorrect power, or other 

causes.

•  Heating element:  3 years from date of purchase. This does not include damage, tampering, improper 

electrical power, or wiring.

•  Power supply and supplemental accessories (Transformer, Thermal Control Unit):  

2 years from date of purchase.

Please follow instructions thoroughly. Claims will not be allowed for direct or indirect damages beyond 

this product due to failure to follow installation instructions.

Customer

 

Support

: For questions or support, contact WarmlyYours at (800) 875-5285 or go to WarmlyYours.com. 

*FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.

1

Содержание FeelsWarm












Отзывы: