PELLET STOVES 7 PS45B 041113-24
NOTE:
INSTALL VENT
A T C L E A R A N C E S
S P E C I F I E D B Y T H E
VENT MANUFACTURER
Clearances to Combustibles
Clearances
Front 48”
(1.2m)
Side
6" (155mm)
Back 3” (76mm)
The center of the fl ue is 18-5/8” above the surface upon
which the stove rests.
IMPORTANT
INSTALL VENT AT CLEARANCES SPECIFIED BY THE VENT
MANUFACTURER.
• Minimum clearances specifi ed may not allow for ease of
operation and maintenance (please take this in to account when
planning the installation). If installed to the minimum clearances,
removal of the appliance may be necessary for servicing.
• Recommended clearance zone from the front
of the appliance to combustibles is 4 feet minimum.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO
SCALE.
Alcove Installations
Minimum alcove height is 5 ft. (1.54 m), minimum width is 36
in. (92 cm) and maximum depth is 24 in. (61 cm).
Note: it is difficult to service the unit when installed
in a 36 in. alcove and may require the unit to be
removed for servicing. Please allow as much area on
either side of the unit as possible for ease of service.
3”
6”
6”
24”
*See Vent Manufacturer’s
instructions
3”
6”
3”
3”
Fig# 4a Corner Install
Fig #4b Right Wall - Horizontal Vent
Fig #4c Right Wall - vertical vent
Fig #4d Alcove Installation
