background image

5 April 2019

 

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.

 

All Dimension are in mm

………….

Copyright © 

 

12

 

GENERAL NOTES : ASNZS 2918 : 2001

 

NOTES:

 

 

• 

Fire Operation and Maintenance Instructions can be downloaded from 

www.warmington.co.nz.

 

 

• 

Warranty 

-

 for full details on product warranties, contact your local Authorised Warmington Retailer.

 

 

• 

Correct installation, operation and maintenance must be maintained to comply with Warmington Warranty.

 

 

• 

The appliance and flue system must be installed in accordance with ASNZS2918:2001 and the appropriate 

 

Building codes.

 

 

• 

The flue system and fireplace is to be swept annually or more frequently if required.

 

WARNINGS:

 

 

  

WARNING; ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN 

   

 

   

WRITING BY THE TESTING AUTHORITY IS CONSIDERED AS BREACHING AS/NZS 4013.

 

 

  

WARNING; DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS TO START OR REKINDLE 

   

 

   

THE FIRE.

 

 

  

WARNING; DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS IN THE VICINITY OF THIS 

   

 

   

APPLIANCE WHEN IT IS OPERATING.

 

 

  

WARNING; DO NOT STORE FUEL WITHIN HEATER INSTALLATION CLEARANCES.

 

 

  

WARNING;  WHEN OPERATION THIS APPLIANCE AS AN OPEN FIRE USE A SPARK 

   

 

 

   

SCREEN.

 

 

  

CAUTION

:  THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMES IN 

 

 

 

   

ACCORDANCE WITH THESE INSTRUCTIONS

 

 

  

CAUTION

: THE USE OF SOME TYPES OF PRESERVATIVE

-

TREATED WOOD AS A FUEL CAN 

 

 

   

BE HAZARDOUS.

 

 

Industries 1994 LTD

 

PO Box 58652, Botany  2163, Auckland

 

 

www.warmington.co.nz

 

 

NOTE: For Operation Instructions download from the website 

www.warmington.co.nz

 

Model

 

Estimated KW

 

Average KW

 

SI 780 FST

 

17

 

11

 

SI 780T FST

 

19

 

12

 

SI 900 FST

 

23

 

13

 

SI 1100 FST

 

25

 

14

 

Содержание SI 1100FST













Отзывы: