29 March 2021
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
All Dimension are in mm
………….
Copyright ©
18
Your Fire must be Installed and tested by a suitably qualified Gasfitter prior to use.
To light:
•
Open
the front cover by pulling in outwards.
•
Push in the ignition control switch and hold in the
‘
PILOT
’
position for 5
-
10 seconds until you can hear
the gas come through the pipe –
making sure the ignition switch is pressed in firmly.
•
To strike the igniter, turn anti clockwise to the
* STAR
position (
w
ith the ignition switch still firmly
pressed in
)
until you hear the pilot ignite with a
‘
click
’.
Repeat this process 2 or 3 times if necessary.
•
Once the pilot flame is lit, hold this position for 3
-
5 seconds, then gently let the ignition switch out, and
set the flame control to high.
It may take a few seconds for the burner to light all the way across.
•
Once the flame is established, adjust to the desired setting and close the cover.
To shut down:
•
Open the cover by pulling it outwards.
•
Turn the control ignition switch to
‘
PILOT
’
and the flame bed will extinguish.
•
Pilot light may be left on and the pilot flame will still burn.
•
To fully extinguish, turn to the
‘
OFF
’
position before closing the cover.
FASCIA KIT
-
Black or Stainless Steel
•
Locate the three self
-
tapping screws provided into the under
-
side of the top ledge of the firebox
•
Remove the backing tape from the adhesive Velcro pads at the bottom of each fascia side
•
Offer the fascia into position locating the three screws into their associated slots
-
tighten screws
•
Apply firm pressure to the bottom edges to bond the Velcro tape
•
The fascia may be removed at any time by loosening the screws and parting the Velcro
•
Please refer to additional sheet for Burner Ratings and Frame
-
out details.
OPERATION OF YOUR WARMINGTON GAS CONVECTION FIRE (SG ONLY)
Note:
Fascia is fitted at the end of the installation
process and may be after the wall and
surroundings have been completed.
