background image

14 June 2016 

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. 

All Dimension are in mm……..Copyright ©  

FLUELESS OUTDOOR GAS OPEN FIRES 

Installation Instructions

 

SG & EG 700-780-900-1100-1250-1500

 

Outdoor Flueless

 

IMPORTANT NOTE:  
 
ALL WARMINGTON FLUELESS 
GAS FIRES ARE TO BE REBATED 
INTO ITS ENCLOSURE 40mm IF 
EXPOSED TO DIRECT 

Important Note:

 

Fire for Outdoor use only, 
NOT to be Installed Indoors . 

ALL WARMINGTON FLUELESS GAS 
FIRES ARE TO BE INSTALLED INTO 
OPEN OUTDOOR AREAS ONLY, 
THIS IS TO ALLOW GASSES TO ES-
CAPE.  

All  Load  Bearing  Structures  are 
to be Engineered to carry load . 
See table for weights in kg 

Note: HEBEL KITSET ASSEMBLY 

Details 

 

When purchasing the “Hebel Heat Cell Kit” the 

assembly Guide will come with the Kit. 
 

These  Hebel  Kits  are  not  designed  to  carry 
loads .

 

Plinth & Hearth 
NOT Provided 

The fireplace is constructed and tested to comply with NZS 4558(int):2013 “Decorative gas log and other fuel effect appliances”. 

 

Keep these instructions for further reference. Ensure that you have the correct and current installation details for the Warmington fireplace. 

 

Installation

 

The Warmington unit is to be installed by a certified Warmington installer or an approved NZHHA installation technician. 

See www.homeheat.co.nz/members for a certified NZHHA SFAIT Installer in your area. 

A licenced certified gas fitter and licenced electrician are required to run power and gas supplies as required to the unit and any commissioning as part of the 

installation process.The heater must be installed according to these instructions and in compliance with all relevant building, gas fitting, electrical and other 

statutory regulations. 

 

IMPORTANT 

Read all the instructions carefully before commencing the Installation. Failure to follow these instructions may result in a fire hazard and void the warranty 

Related documents 

Fireplace installation, and instructions to comply with NZS 5601.1:2013, 3645.1(Int):2010, 

3645.2(Int):2010, 5266:2014, 2918:2001. 

Содержание SG 700





















Отзывы: