background image

Warming-Trends.com  |  303 346 2224  |  [email protected]

5

G E N E R A L  I N F O R M AT I O N

WARNING
HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.

•  Young children should be carefully supervised when they are in the area of the appliance.

• 

Clothing or other flammable materials should not be hung from the appliance or placed on or near 

            the appliance.

• 

Children and adults should be alerted to the hazards of high surface temperatures and should stay 

away to avoid burns or clothing ignition.

WARNING

Do not use appliance if any part has been under water. Immediately call a qualified service technician 

to inspect the appliance and to replace any part of the control system and any gas control that has been 

under water.

WARNING

Product is not intended to be used to burn wood or other combustibles. Solid fuels shall not be 

burned in the appliance.  

Do not put any combustible materials into the fire feature.

WARNING

Only use Liquid Propane or Natural Gas as specified for your Warming Trends appliance or burner. 

 

Do not use an alternative fuel.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier. It is 

the installer’s responsibility to read thoroughly before installing or servicing this equipment to ensure a safe 

instal

lation and to educate the end us

er as to proper operation. Warming Trends is not responsible for damage 

due to improperly installed or operated units. Installers must leave this user guide with the end user. Instructions 

are updated as needed, and it is the installer or owners’ responsibility to periodically review Warming Trends 

website for applicable updates (www.Warming-Trends.com) Please keep this with your important papers.

This Owner’s Guide and User Guide contains critical information for the safe installation and operation of your 

Platinum Ignition

 You must read this user guide in its entirety prior to installation and/or operation. Failure to 

follow these instructions may result in property damage, personal injury, or death. 

Содержание PLATINUM IGNITION























Отзывы: