23
Leaving the thermometer on your body for a period longer than 30 days
may lead to the development of pressure sores. Control the condition of
your body under the dressing and change the application site maximum
every 7 days.
4.5 Connection of the WARMIE sensor with the WARMIE24 app in the smartphone
1.
In order to establish a connection to a mobile device, an application whose
installation has been described in section
4.2
is required.
2.
Make sure that your mobile phone has Bluetooth enabled and that all permits
necessary for working with the sensor are granted to the application during
the installation process.
3.
The application will immediately start the procedure of establishing a connec-
tion with the WARMIE sensor.
4.
In the case of the first connection of the device or after a longer period of
inactivity, the screen will display a message about the need to activate the
device – see section
.
5.
After the connection is established, the application begins to display the current
results of the temperature measurement – this is described in section
.
4.6 Measurement of temperature and collection of results
Before proceeding with the measurements, both the WARMIE sensor and
the patient must remain in stable ambient temperature conditions for at
least 15 minutes.
1.
Before starting the measurements, the system should be in the following state:
•
sensor in the active state and paired with the WARMIE24 application (see sec-
•
sensor placed on your body by means of a band according to the description