WARMIE WM-1020 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 36

WARMIE WM-1020 Скачать руководство пользователя страница 17

17

The third column contains the highest number of the system’s version

with which the manufacturer has tested the device. The application should also work

properly with higher versions of the system, but the manufacturer cannot guaran-

tee this. The manufacturer will conduct tests for each newly appearing version of

the system and will publish information about its compliance on the manufacturer’s

website www.warmie.eu. If any non-compliance is identified, the manufacturer will try

to introduce the necessary improvements and make its newer version available.

If the version of the system on your smartphone is higher than the one

listed in the column entitled The highest tested version, check the up-to-

-date information at www.warmie.eu or contact the manufacturer.

4.2 WARMIE24 application

1.

Before using the thermometer, download the WARMIE24 app from:

•

the Google Play store, and then install it on your mobile with the Androdid 5.0

system or any other higher version, or

•

the AppStore, and then install it on your mobile with the iOS 13 system or any

other higher version

«
...
15
16
17
18
19
...
»

Содержание WM-1020





































Отзывы:

Нет отзывов