19
4.3 Activation, deactivation of the connection – pairing of devices
The proper operation of the device requires the establishment of a per-
manent Bluetooth radio connection between the WARMIE sensor and the smartpho-
ne, on which the WARMIE24 app is installed, i.e. the pairing of the WARMIE sensor
with the smartphone. The user performs the pairing of these two devices in a simple
manner described below. If the sensor is used continuously, or with short breaks, the
pairing procedure is only conducted before the first use, then the devices establish the
connection automatically each time it is broken.
The repeated pairing of the devices by the user is necessary only after
the manual deactivation of the connection or a very long period when the communi-
cation between the devices is not available (lack of coverage).
4.3.1 Activation of the connection – pairing of devices
Before the connection between the sensor and the smartphone is ac-
tivated, start the WARMIE24 application on your smartphone. The application must
not be paired with any sensor. Whether the application is paired, can be checked in
the “Settings” menu: the number of the sensor with which the application is paired is
displayed on the DATA bar in the menu. In such a case, the current connection must
be broken in a manner described in section
.
In order to activate the connection, press the centre of the casing with
your finger. The easiest way in which this can be done is to grab the casing between
your thumb and index finger and press the casing with your fingers.
