INSTALLATION, COMMISSIONING & SERVICING
All works to this product including installation, commissioning, service or repair must be conducted
only by appropriately certified and competent persons in accordance with all manufacturer’s
instructions contained herein, as well as all current related legislation, regulations, standards,
codes and by-laws applicable to the territory of installation.
This product must be installed, commissioned, serviced or repaired only by a competent person
in accordance with the current:
• IEE Regulations, Building Regulations,
• Building Standards (Scotland) (Consolidation),
• Building Regulations (Northern Ireland),
• Local water by-laws,
• Health and Safety Document 63S (the Electricity at Work Regulations 1989),
• IS813 (Eire)
• and other local requirements
• Where no specific instruction is given, reference should be made to the relevant codes of
Practice:
– BS7074:1 : Code of practice for domestic and hot water supply
– EN:12828 : Central heating for domestic premises
The product must be registered with the manufacturer according to the terms and conditions of
the related product guarantee. See Section 6.
This product must be serviced annually by appropriately certified and competent persons, and
proof of servicing e.g., receipts/invoices, must be retained by the User.
A full statement of the guarantee applicable to this product is included in Section 6 of this manual.
FAILURE TO CORRECTLY INSTALL, REGISTER AND ANNUALLY
SERVICE THIS PRODUCT WILL INVALIDATE ALL GUARANTEES
