WarmFlow Boilerhouse B120HE, Руководство пользователя

Страница: 84 / 92

Page 82
15.1.8 Mode Select
1. Press SELECT to toggle through ON / AUTO / OFF modes as indicated by the timer
status.
2. ON mode turns on the timer.
3. OFF mode turns off the timer.
4. AUTO mode runs the set programme.
15.1.9 Manual Select
This function is only applicable when your timer is set on AUTO mode.
You can temporarily override the normal switching times by pressing the ADV key. The
temporarily override won‟t affect the normal programme after execution of the override.
1. Press CH ADV or HW ADV key the CH icon or HW icon will flash.
2. In approximately 5 seconds the display CH select mode „AUTO‟ or HW select mode
„AUTO‟ will flash and go into the manual override function.
3. OFF mode turns off the timer.
4. To cancel override by pressing CH ADV or HW ADV and the „AUTO‟ will stop flash.
15.1.10 Manual Hour
1. Press CH ADV or HW ADV key, the CH icon will flash.
2. You now have approx 5 second to enter desired length of time by pressing
CH ADV
or
HW ADV key once for each hour the new time set should be in affect.
3. The MANUAL HOUR function will bring the unit ON 1 hour to 3 hours in the OFF mode.
4. The MANUAL HOUR function will bring the unit OFF 1 hour to 3 hours in the ON mode.
5. The MANUAL HOUR function is in operation, a count down clock will appear. Then
normal display and count down clock will appear on the LCD alternately.
6. The MANUAL HOUR function will bring the unit ON 1 hour to 3 hours in off, clock will
count down immediately.
7. When MANUAL HOUR function will extend by 1 hour to 3 hours while ON, clock will
count down after the programmed ON is finished.
15.1.11 Cancel Manual Hour Function
Press CH ADV or HW ADV button again the LCD display and switching status will return to
normal.