Warm Tech CAC20KW, Инструкция по эксплуатации, Страница: 29 / 54

29
A. Fuel tank cap B. Fuel gauge
◆
When there is some fuel (kerosene or diesel) in the tank
Attention
1
、
Only check the appliance after flameout and removal of the power plug from power source
；
2
、 Before the ignition make sure there is no oil leakage, when oil leaks please don’t use the appliance
and contact your dealer
；
3
、
please check the fuel tank interior, clean the tank if there is water and waste in the tank.
【
Operation
】
Warning by ignition
：
1
、
check the fuel tank and make sure there is enough fuel in it
；
2
、
do not close your face near the heating part after the ignition, keep the safe distance, min. 3 meter
front from hot air outlet
，
top 2 meter, left and right side more than 2 meter.
（
see under figure
）
3
、
stop using the appliance when there is smoke or strange odor omitted
；
4
、
make sure the heater is ignited before you leave it.
Safety clearances
Ignition
：
insert the plug in the socket
，
put the
power switch to position“1”, the indicator lights up, It
would ignite automatically when the setting temperature is higher than ambient temperature in LED
digital temperature display.
Attention
：
while the heater is operating, never let the floor ground overheats to prevent causing fire.
◆
Flameout
Pay attention 1
、
when you shut off the heater, make sure the flame is out before you left the appliance.
2
、 Put the power switch to position“0” waitting fan stop working and the indicator
extinguishes, then remove the plug from the socket.
◆ safety device