Warm Tech CAC20KW, Инструкция по эксплуатации, Страница: 27 / 54

27
【
Assembling wheels and tube frame
】
1
、
insert the wheel axle to the corresponding hole of lower tube frame
，
set bushing G at the two ends
，
slide the wheel F over the wheel axle H
，
put on wheel cap E
。
2
、
Put the heater body on the lower tube frame B, make sure the 4 holes of handle frame point towards
the corresponding 4 holes on the lower tube frame respectively.
3
、
Insert screws J in the holes
，
place flat washers D under the lower frame B and tighten the
hexangular screw C
。
4
、
Insert other screws in the holes respectively and use a screw driver to tighten them by the same way.
【
Dimensions
】
【
Technical parameters
】