Waring WJX50, Инструкция, Страница: 8 / 20

Assembling Your Waring
™
Commercial Juice Extractor
NOTE: The juice extractor will not operate until the pulp
container and lid are locked into position. To assemble
this unit the following steps must be followed in the
order given.
Step 1
Place juice bowl on top of the motor
housing.
Step 2
Place the stainless steel filter basket
inside the center of the juice bowl. Make
sure it snaps into hub. Press firmly on the
stainless rim of the filter basket. To avoid
injury do not press on shredder disk.
Note:
Make sure the stainless steel filter
basket is pushed down firmly until it clicks
into place.
Step 3
Place the top cover over the top of the
motor housing. Lock juice cover into
place by turning right to left (counter-
clockwise) until cover locks into position.
Follow instructional arrows on top cover.
Step 4
Grab handle of pulp container and slide
under cover by tilting forward. Push
bottom of pulp container into unit until
it is seated properly.
Note:
Unit will not operate if top cover
and pulp container are not properly
positioned.
7
Step 3
Step 1 and 2
Step 4
07wc30118_wjx50_ib.indd 8 9/24/07 9:47:53 AM