Waring WJX50, Инструкция, Страница: 14 / 20

POSSIBLE PROBLEM SOLUTION
Machine will not work
when switched on
Make sure unit is plugged into
proper power supply source. Make
sure all parts are in the proper
working position. Press the red
reset button on bottom of unit.
Check your home circuit breaker or
fuse panel to make sure they are live.
Motor appears to stall
when juicing
Wet pulp can build up under the
cover if the juicing action is too
vigorous. Try slower juicing action
by pushing the food pusher down
more slowly.
Excess pulp builds
up in the filter basket
Stop the juicing process. Remove
the juicer cover and scrape off pulp.
Re-assemble and begin juicing again.
Try alternating (soft and hard)
vegetable and fruit varieties.
Pulp too wet
and insufficient
Change to low or high speed. Try a
slower juicing action. Remove mesh
filter basket and clean mesh walls
with a fine brush in a solution of
70% water and 30% bleach. This will
remove excess fiber buildup (from
fruit or vegetables) which could be
inhibiting the juice flow.
Juice leaks between the
rim of the juicer cover
and the juice bowl
Try a slower juicing action by
pushing the food pusher down
more slowly. Make sure unit is
clean before use.
Juice bowl – juice sprays
out from spout
Try a slower juicing action by
pushing the food pusher down
more slowly. Make sure juice cup
is in proper position.
13
07wc30118_wjx50_ib.indd 14 9/24/07 9:47:54 AM