15
Troubleshooting
!
WARNING: Make sure the power is off at the electrical panel box
before you attempt any repairs. Refer to step 6"Making the electrical
connections" on page 11.
Problem
Solution
The fan will not start
The fan sounds noisy.
The remote control is
not working
Check the main and branch circuit fuses or breakers.
Check the line wire connections to the fan and switch wire connections in the switch housing
Check to make sure the frequency switches from the remote control and receiver are set to the
same frequency.
Make sure all motor housing screws are Snug.
Make sure the screws that attach the fan blade to the motor hub are tight
Make sure the wire nut connections are not rattling against each other or the interior wall
of the switch housing.
Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during
this time.
Make sure there is a short distance from the ceiling to the canopy. It should not touch the ceiling
Make sure your ceiling box is secure and that rubber isolator pads are used between the
mounting bracket and outlet box.
Do not connect the fan wit wall mounted variable speed control(s).
Make sure the frequency switches are set correcty
