waratah HTH616C SIII, Руководство оператора

Страница: 7 / 92

General
Continued on next page T7M7G6M,0000662 -19-27APR21-1/2
Features
TX1055466
8
9
8
11
12
10
6
6
11
7
1
2
12
3
4
5
14
8
9
8
11
13
10
6
6
11
7
TX1055466
—UN—15APR09
This overview should help the operator to become familiar
with the features of the HTH616C harvester head.
1. Link. The pivot point between the carrier boom and
the harvester head.
2. Rotator. Stationary housing with motor and gears that
turn the harvester head.
3. Upper Delimb Cylinder. Controls the upper delimb
knives.
4. Upper Delimb Link. Moves the upper delimb knives
in unison.
5. Front knife/Top knife. Helps delimb (and debark)
the tree as it is pulled through the harvester head.
6. Upper Delimb arm. Work with the top knife to delimb
(and debark) the tree as it feeds through the harvester
head.
7. Fixed Feed Roller. Centre-mounted roller that feeds
the tree through the harvester head, together with the
feed wheels.
8. Feed Wheels. Used to grip the tree and feed it
through the harvester head.
9. Main Saw. Cuts stems to length, at the rear end of
the harvester head.
10. Bottom Knife. Debarks and delimbs the tree as it is
pulled through the harvester head.
11. Feed Arm. House the feed roller motors and the
cylinders that provide gripping pressure.
12. Measuring Wheel. Rolls along the tree to measure
the length fed through.
13. Tilt Frame. U-shaped bracket, which pivots the
harvester head vertically and horizontally.
14. Top Saw. Cuts the top off stems, at the front end of
the harvester head.
1-1-3 081921
PN=7