Alarm Deployment
In the Alarm Deployment screen users can set:
IO Detection:
Camera allows user to add an external source of alert (motion sensor or push button).
We recommend the Instar IN-500 PIR Sensor as external motion sensor.
Sensor Type:
The external sensor can be always open or always close. Please check your
alarm device setting in the user guide.
Motion Detection Sensitivity:
users can choose Low/ Middle/ High sensitivity according to needs.
In the Web Interface, users can set sensitivity in a range 1-100.
Voice Detection Sensitivity:
user can choose Low/ Middle/ High according to needs. In the
Web Interface, users can set sensitivity in a range 1-10.
Temperature detection:
function
disabled in this model
Humidity detection:
function disabled in this model
Alarm trigger type
Trigger alone:
The alarm will be triggered for any kind of active alarm event (Motion/ Voice/IO).
Trigger link:
The alarm will be triggered for multiple detection at the same time (Motion/ Voice/IO).
Alarm Action
Save Picture to Email: When an alarm is detected, the camera will send three pictures to the email
box. Users can set up to 2 recipients.
Click Mail Setting to setup the email. Check your email provider for SMTP Server and Port.
Save Picture to FTP:
When an alarm is detected, the camera will send 2 pictures to your FTP server.
Click on FTP Setting to setup FTP.
Save Record to FTP:
When an alarm is detected, the camera will send a 15 sec video to your
FTP server.
Save Picture to SD/TF:
When an alarm is detected, the camera will send 2 pictures to the SD
card.
Save Record to SD/TF:
When an alarm is detected, the camera will send a 30 sec video to
the SD card.
Trigger IO Output:
User can add a siren or another alarm device to the camera. When an alarm is
detected, the external IO output will work. Users can choose alarm duration from 5 to 30 sec.
Preset Linkage:
When an alarm is detected, the camera will focus on one of the 8 Preset spots (see
above).
Speaker Linkage:
When an alarm is detected the speaker will act as a siren for the chosen
length (5-30sec).
Time Deployment
Users can set time and day of the week where the alarm function is active.
Pink means the time is armed, while blank means the time is disarmed.
www.wansview.com
16
