background image

24

D/G15 & D/G17 - Warranty

Limited Warranty

Wanner Engineering, Inc. (“Wanner”) extends to the original 

purchaser of equipment supplied or manufactured by 

Wanner and bearing its name, a limited one-year warranty 

from the date of purchase against defects in material or 

workmanship, under normal use and service, and provided 

the equipment is installed, operated and maintained in 

accordance with instructions supplied by Wanner. Wanner 

will repair or replace, at its option, defective parts without 

charge if: (a) you provide written notice of any defect within 

thirty (30) days from the discovery of the defect; (b) the claim 

is received by Wanner before the expiration of the warranty 

period; and (c) such parts are returned with transportation 

charges prepaid to Wanner Engineering, Inc., 1204 

Chestnut Avenue, Minneapolis, Minnesota 55403. A return 

goods authorization must be received prior to the return of 

the defective part. No allowance will be made for repairs 

undertaken without Wanner written consent or approval.
Notwithstanding anything to the contrary, this warranty 

does not cover:
1. Electric motors (if applicable) not manufactured by 

Wanner. The warranties, if any, on such equipment are 

assigned to you by Wanner (without recourse) at the time 

of purchase.
2. Normal wear and/or damage caused by or related to 

abrasion, corrosion, abuse, negligence, accident, faulty 

installation or tampering which impairs normal operation.
3. Transportation costs.
This limited warranty is exclusive, and is in lieu of any other 

warranties (oral, express, implied or statutory) including, 

but not limited to, implied warranties of merchantability 

and  fitness  for  a  particular  purpose;  warranties  of  non-

infringement; warranties arising from course of dealing or 

usage of trade or any other matter. Any descriptions of the 

equipment,  drawings,  specifications,  and  any  samples, 

models, bulletins, or similar material used in connection 

with the sale of equipment are for the sole purpose of 

identifying the equipment and are not to be construed as 

an express warranty that the equipment will conform to 

such description.  Any field advisory or installation support 

is advisory only. Every form of liability for direct, special, 

incidental or consequential damages or loss is expressly 

excluded and denied. All liability of Wanner shall terminate 

one (1) year from the date of purchase of the equipment.

World Headquarters & Manufacturing

 

Wanner Engineering, Inc 

1204 Chestnut Avenue,  

Minneapolis, MN  55403 USA 

Phone: 612-332-5681  ● Fax: 612-332-6937

 

Toll-Free Fax (USA): 800-332-6812 

Email: [email protected] 

www.Hydra-Cell.com 

 

207 US Highway 281 

Wichita Falls, TX 76310 USA 

Phone: 940-322-7111 

Toll-Free Fax: 800-234-1384 

Email: [email protected] 

www.Hydra-Cell.com 

 

Latin American Office

 

São Paulo, Brazil 

Phone: +55 (11) 4081-7098 

Email: [email protected] 

www.Hydra-Cell-Pumps.com.br 

Wanner Engineering, Inc.

Wanner International Ltd 

Hampshire - United Kingdom 

Phone: +44 (0) 1252 816847 

Email: [email protected]

 

www.Hydra-Cell.co.uk

Wanner Pumps Ltd. 

Kowloon - Hong Kong  

Phone: +852 3428 6534 

Email: [email protected] 

www.WannerPumps.com 

 

Shanghai - China  

Phone: +86-21-6876 3700 

Email: [email protected] 

www.WannerPumps.com 

 

Wanner Pumps Ltd.

Wanner International Ltd.

© 2004 Wanner Engineering, Inc. 

Printed in USA

D15-991-2400 Rev B

Содержание Hydra-Cell D15

























Отзывы: