1
2
. Raise
/lower
the right
side of
the
X-Axi
s
by turning the
cylindri
cal coupler at the bottom
of the
Z-Axis
threaded
rod
.
1
3
. Do the same for the
coupler
on the
left
side
.
You need to
make sure that your X-Axis (the
2
parallel rods running left-to-right)
is perfectly level.
Once your tower is locked in placed you will need to make sure that your X-Axis (the
2
parallel
rods running left-to-right)
is
perfectly level
to your printing platform
. You
can raise each side of the X-Axis by turning the couplers at the bottom of the Z-Axis
threaded rods.
