To begin leveling your build plate push-click the rotary dial so that you are within
the LCD's Main Menu. Scroll down to QUICK SETTINGS and push-click the
rotary dial once more.
Next, scroll down to HOME ALL and your stepper motors will begin to operate in
sequence to leave your nozzle resting right above the left-front of your build
surface.
Th
e image to the right shows
where
your extruder assembly should rest
after selecting HOME AL
L.
Before you start leveling the build plate
make sure that you have placed your
build surface (Tape Sheet, Glass Plate,
or Custom Surface) onto your build
plate so that you can account for the
added height of your chosen surface
during leveling.
At this point go ahead and turn your
printer OFF via the power switch on the
back of your control box.
