Find your build platform (it’s the aluminum plate towards the front of
your printer on which you will be building your models). Tear off one
m
asking
t
ape
s
heet and cover the plat
form with the sheet being as smooth as
possible. You will be printing on this sheet. You can also use painter's tape as a
substitute.
Hardware Setup #4
Find your
Power Cable
in the
cardboard
accessories box
and plug
it into the power supply socket on
your
Control Box
(
the socket is
located next to the power switch).
Note:
Your printer is able to operate
using 2 voltage options: 110V and
220V. Make sure you set the switch
to
the correct
voltage according to your
country's power supply voltage
(USA
uses 110V)
. Before connecting
anything, make sure that the
Duplicator i3 power switch is in the
OFF
position
.
Your Hardware Setup is now
complete.
