WANHAO D12 300, Руководство пользователя

Страница: 35 / 50

Support type:
Platform adhesion type:
Stupport dual extrusion:
None:
None:
Touching buildplate:
Brim:
Everywhere:
Raft:
Type of support structure build.
"Touching buildplate"is the most commonly used support
setting.
Different options that help in preventing corners from lifting due to warping.
Which extruder to use for support material, for break-away support you can use both extruders.
But if one of the materials is more expensive then the other you could select an extruder to use
for support material. This causes more extruder switches.
You can also use the 2nd extruder for soluble support materials.
The wipe-tower is a tower printed on every layer when switching between nozzles.
The old nozzle is wiped off on the tower before the new nozzle is used to print the 2nd color.
The amount of material put in the wipe/prime tower.
This is done in volume because in general you want to extrude a certain amount of volume to
get the extruder going, independent on the layer height.
This means that with thinner layers, your tower gets bigger.
The ooze shield is a 1 line thick shell around the object which stands a few mm form the object.
This shield catches any oozing from the unused nozzle in dual-extrusion.
None does not do
any support.
None does not do
any support.
only creates support
where the support
structure will touch
the build platform.
Brim adds a single layer
thick flat area around your
object which is easy to cut
off afterwards, and it is the
recommended option.
Creates support even
on top of part of the
model.
Raft adds a thick raster below the object
and a thin interface between this and you
object.( Note that enabling the brim or
raft disables the skirt)
Wipe&prime tower:
Wipe&prime tower volume per layer (mm3):
Ooze shield:
34