WANHAO D12 300, Руководство пользователя

Страница: 13 / 50

12
Place the printer
components onto
a flat table. Please
handle with care.
Remove the
protection
foam and tape
from position.
Put the printer base on it’s side. Install the printer tower onto the
base. Then use 4pcs M5 x 40mm bolt to lock the tower onto the
base.
Note: On the base there’s sticker No.1 and on the tower there’s
sticker No.1
.
So No.1 base match to the No.1 tower. No.2 base
match to the No.2 tower.
Install the
printing head
onto the gantry.
Then to lock the
head with
2 M3 x 6mm
locking screw.
4
5
To push the
printing head
gently to ensure
well secured. If
not, re-lock the
bolts.
1
2
3