- 13 -
Engine starting (Fig 17)
Put the key into ignition switch and turn to ON
Electric starter: press start button (1) to start
engine, DO not use the starter more than 5
seconds each time.
NOTICE:
Electric starting is only in the condition of grasping the brake handle.
Electric starting not succeed, if starting again with it, we must stop for 30 seconds, If still
can
’
t start, Please use kick-start.
Engine kick-start :open ignition switch and add gasoline slowly, step kick-starter pedal
down quickly with strength to start engine.
Notice: After using kick-starter pedal, pull it back to original position. Otherwise have
effect to safety ride, and bad to engine.
Had better not open ignition switch when scooter has not use for a long time, and first step
kick starter for some times. Make flue into carburetor and then into cylinder, and open
ignition switch, Start engine, it is easy to start engine like this.
If cold start, warming up engine for 2-3 minutes.
Fig 17
- 14 -
WARNING:
Wear the trousers to avoid touching with exhaust pipe and was burnt.
The entire device must be installed according to requirement of the traffic rule.
Take the license to riding.
NOTICE:
Control the speed and load during 1000kmof running in period.
Load should be within 100kg(including driver)
If take more weight and speed will reduce life of engine, Change the crankcase oil after
300km (Page 25) to a new motorcycle.
Speed according to (Tabel 2)
Tabel 2
Log (km):
0
～
200
200
～
500
500
～
1000
Speed (km/h):
≤
20
≤
30
≤
35
Driving operation
Release rear brake level, add gasoline slowly with throttle grip, then motorcycle will move
forward smoothly.
