- 23 -
Replacing gearbox oil (fig 25)
Suggestion the engine oil number
SAE 80W/90
（
the vehicle in north could use the
anti-freeze oil
）
Oil container
Resolving capacity:0. 10 L
Changing capacity:0. 09 L
•
Steady the motorcycle
•
Take apart the limiting bolt (2), and the spilling bolt (1).
NOTICE: THE ENGINE MUST BE WARMER
WHEN SPILLING, AND THE VEHCILE MUST
BE STEADYING BY MAIN STAND!
Reinstall the spilling bolt after clean. And screw up.
Inject 100ml to engine through immix bolt
Install immit bolt and screw up.
•
Fig. 25
2
1
- 24 -
Spark plug (Fig 26)
The specification of spark plug:
BPR7HS BP7HS
（
NGK
）
、
E7TC OR E7RTC
Take apart the spark plug; Take it of with special tool.
Examine if there is dirty on poles and the porcelain head in center .
I
f it has corroded, must change it .It is the best way to clean with
the liquor of spark plug Use wire brush if no cleaner.
Normally the gap between side electrode (1) and Center electrode (2) is 0.6-0.7mm.
Don
’
t use other spare plug.
Replacing fuse
The specified electric current of the total fuse is 15 A
If the connection is not good, the fuse will overheat and breakdown.
Do not use any fuse whose specification is different from assigned. It is the same
Main reason for wiring burning.
NOTICE: Do not use brass wires to replace the recommended.
Fig26
(0.6
～
0.7)mm
1
2
