67
W&T
IP-Watcher 2x2 Digital PoE
To clear both error memories using the „Delete report“
1
button, you must be logged in with Administrator rights.
Access with Administrator rights
A reset, whether caused by interrupting the supply voltage or
performing a reset from the
Logout
page, also deletes the
report.
In addition, error and diagnostic messages can be processed
using SNMP traps or as a syslog message. For additional
information, please refer to the sections
System Traps per SNMP
and
System Messages using syslog
.
6.2 Check Config
The device allows an Administrator to view and check the
current configuration on an overview Web page.
This is opened using the configuration menu:
Diag >> Test >> Check Config
This Web page shows which access and message types are
enabled with which parameters. The device performs a
plausibility check of the settings. If missing parameters are
