68
W&T
IP-Watcher 2x2 Digital PoE
detected which prevent proper operation of the access type, the
corresponding fields are highlighted in orange. Clicking on the
link to the incorrect configuration takes you directly to the
corresponding settings page
Overview and plausibility check of the settings with an error
Also checked and displayed is which send paths have been
selected for the alarms and whether all the necessary
parameters have been configured. Here again the access types
are highlighted in orange if they have not been completely
configured.
Alarm send paths
6.3 Check Alarm
To check whether the configured message types are
functioning properly for the enabled alarms, you can go to the
Diag >> Test >> Check Alarm
page and manually set trigger, acknowledgement and reset for
the available alarms
