W&T Electronics Web-Thermo-Hygrobarograph 57613, Руководство пользователя

Страница: 11 / 90

11
W&T
Subject to errors and changes
1.6 IP assignment using DHCP protocol
Many networks use DHCY (Dynamic Host Configuration
Protocol) or its predecessor BOOTP described in the following
section for centralized, dynamic assignment of network
parameters. By default DHCP protocol is activated, so that in
network environments with dynamic IP assignment you only
need to connect the Web-Thermo-Hygrobarograph to the
network. The following parameters can be assigned using
DHCP:
• IP address
• Subnet mask
• Gateway address
• DNS server
• Lease time
1
T o p r e v e n t u n d e s i r e d a d d r e s s a s s i g n m e n t
or address changes, we recommend deactivating DHCP,
BOOTP and RARP unless these are expressly used in the
respective network environment. Web-Thermo-Hygrobaro-
graphs with incorrectly assigned IP address can be
conveniently found and reconfigured after the fact using the
scan function of the WuTility management tool.
1.6.1 Activating/deactivating DHCP
By default DHCP is activated. The following methods are
available for deactivating or later reactivating DHCP protocol.
•
Management tool WuTility
Select the desired Web-Thermo-Hygrobarograph from the
device list and click on the
IP address button. In the first
dialog window enter the new network parameters and then
click on
Next .