W&H WS-90, Инструкция по эксплуатации

Страница: 35 / 42

35
7. Technical data
Transmission ratio 1 .75:1
Motor connection according to standard ISO 3964
Chuck system [mm]
Note: only use tools approved for the screwdriver angled! *
Ø
2 .35
W&H special chuck system
Max . speed [min
-1
] 10,000
Max . torque on tool * [Ncm] 120
* For tools which are not approved for use in the screwdriver angled by the manufacturer, the user must choose
the correct operating conditions in order to ensure that there is no risk to the user, the patient or third parties .
min
-1
(revolutions per minute)