W&H Lara RIL-117, Инструкция по эксплуатации

Страница: 57 / 138

LARA | Instructions for use | RIL-1 ENG Rev04 | 28/02/2019 | © 2019 W&H Sterilization Srl 57
Sterilization cycles
FILLING THE CLEAN WATER TANK
1
Switch the sterilizer ON and remove the tank filling cover-cap.
2
Fill the clean water tank with distilled or demineralized water
until the sterilizer makes a sound. See "Technical data" on
page 118 for the tank capacity.
3
Reposition the tank filling cover-cap.
INSERTING THE CHAMBER RACK INTO THE STERILIZER
CAUTION! Risk of burns. Before touching the chamber rack
or contents, ensure the sterilization chamber is not hot.
1
Open the chamber door and align the chamber rack at the
center/bottom of the chamber.
2
Push the chamber rack gently into position until it clicks
into place.
3
Insert cassettes horizontally or vertically, or insert trays.
See "Load maintenance and preparation" on page 54 for
load requirements and "Chamber accessories" on page 18.
4
Close the door.
5
Turn the sterilizer switch ON: after the initialization the
homepage appears.
GENERAL RECOMMENDATIONS
Follow these recommendations to obtain the most from the drying:
n
Ensure the paper side of the sterilization bags faces up, and
that the space in-between bags is enough.
n
To enjoy the full benefit of short cycle times, always place the
load on the uppertray of the chamber rack and remove other
trays from the chamber.
Sterilization cycle description
AVAILABLE STERILIZATION CYCLES
See "Sterilization cycles" on page 111 for the full list of key program
features, including sterilization time, temperature and
recommended load type.
AVAILABLE AUTOMATIC DRYING MODES
Icon Mode Description
AUTO DRY It is available for type B sterilization cycles.
The drying time is automatically adjusted to the load weight.
The recognized load weight categories are the following:
n
light: less than 0.5 kg (1.1 lbs)
n
medium: between 0.5 and 2 kg (from 1.1 to 4.4 lbs)
n
heavy: more than 2 kg (4.4 lbs)
Each weight category has a specific drying time.
ECO DRY
plus Optional, activated with the Performance activation code. The
drying time is automatically adjusted to the shortest
possible for the actual load weight and so it is more precise
than the AUTO DRY drying time.
ECO DRY PLUS MODE ACTIVATION
Note: If you have entered the All in One activation code in Special Codes
menu, the function is already available.