Turn the GS1 assembly upside down and mount the
four angle brackets onto the bed extensions using
eight of the lock nuts.
Do not tighten.
Turn the GS1 right side up. Raise the W&H molder
head several inches. Insert the GS-1 assembly through
the open side and over the machine bed as you guide
the angle brackets into their slots in the top of the
stand. Centralize the guide system relative to the length
of the machine base.
Lower the machine head to hold the sub plate
tight against the machine bed. Install and tighten
the (8) lock nuts that secure the angle brackets
to the stand.
Tighten the (8) lock nuts joining the bed extensions
to the angle brackets.
The assembly is now complete.
13
