Install the two external stock rollers.
Your machine has been
packed with two control
mounting braces and
two #10 flat head
screws, lock washers
and nuts. They are
packed in the box under
the machine head. The
brace shown here is
being mounted to the
top of the black sheet
metal control mounting
enclosure. Use one of
the flat head #10
screws, lock washers
and nuts to mount the
brace on the inside of the sheet metal enclosure with the center counter sunk
hole facing you. The flat head screw goes into the center counter sunk hole. The
lock washer and nut go on the outside, or back side of the enclosure.
9
This view shows the second brace being
mounted to the bottom of the control
mounting enclosure. Use the one remaining
#10 flat head screw, washer and nut mounted
in the center hole of the bracket as you did
with the first brace.
