WANDERS pecan eco l, Руководство пользователя и инструкция по установке

Страница: 24 / 64

24
GB
8. Never cover the chimney breast with combustible material (e.g. paper covering).
9. The wall behind the stove must consist of, or be insulated with, fire-proof materials. The insulation material must resist a
temperature of 700 °C and have a density of 80 kg/m3. Please see for insulation materials table page below).
Never leave the optional wooden part of the handle in the steel ring while using the fireplace. The handle
must only be used to open and close the door; once used, put it back in a safe place. The wood will discolour
over time - this can not be avoided.
Installation
The Pecan Eco is tested in accordance with the international EN 13240 standardization, and has an extra additional
standardization for optimally environment-friendly heating devices related to flue gases. The stove can be connected to a flue
tube to which several stoves are connected. The pipe for flue gas extraction has a diameter of 150 millimetres (connection 146
mm external). The Pecan Eco must never be built in.
Supply of combustion air
The stove must have enough supply of fresh combustion air. If necessary, make an extra air supply opening as close to the
stove as possible to avoid draught. An extra opening for air supply is always required if:
•
the space has a heat recovery system.
• the space has a central exhaust system.
• there is a cooker hood in the same space.
The air supply opening must be closable if it goes through a fire-resistant wall. When there are several combustion devices in
the same space there must be enough air openings to guarantee proper combustion.
External air connection
The fresh air supply channel has a diameter of 80 millimetres. The air supply channel can be fitted via a bottom or rear
connection. If the external air supply goes through a firewall, that channel must be able to be shut off. If the channel is longer
than 1 meter, including a bend of 90 degrees, the channel’s diameter will need to be increased.
To adjust the position of the external air supply, switch the connection piece with the cover plate by unscrewing the bolts on
the respective components.
Table for insulation material. Please note: only use the products that are mentioned in the marked area.
Insulation Packed Thermal conduction Max. appl. temp. Density
Nr. Art. Nr. Form Nr. Packed Nr. °C Nr. kg/m 3
10 mineral wool 01 bands 01 stitched mats 10 100 02 20
11 glass wool 02 loose wool stitched mats 12 120 03 30
12 rock wool 03 wool 02 stitched mats 14 140 04 40
13 waste products granule g. curve 2 16 160 05 50
04 felt 06 60
05 lamella mats 10 07 70
g. curve 1 08 80
06 stitched mats 11 09 90
07 plates g. curve 2 10 100
08 scales 72 720 11 110
09 segments 20 plates 74 740 12 120
10 interwoven g. curve 1 76 760 13 130
21 plates
g. curve 2
18 180
99 others 99 single 99 99
Select the insulation material from this table. Group 99 is NOT ALLOWED