Wamsler WP2-8, Инструкция по установке и эксплуатации

Страница: 46 / 189

WP2-8_GB 46 / 189
4.2. SCOPE OF SUPPLY
The scope of supply covers the following appliances:
•
Heat-resistant gloves, accessory tool to open the door, operating instructions.
4.3. DESCRIPTION OF THE OPERATION
WAMSLER pellet boiler is a special heating equipment for household use, and is suitable for
burning only 6 mm Ø wood pellet as described in Standard ENplus A1. The heating mode the
equipment produces hot air, which radiated to the room. To use the heating option, simply
switch on the boiler, and choose the desired performance grade. When an external regulator is
used, the pellet-burning boiler automatically switches on and off, and the performance grade
can also be modulated automatically. Wood pellets are fully automatically carried by the
equipment to the combustion chamber, and ignited by means of electronic ignition.
Corresponding to the selected performance grade, the controlled conveyor worm transfers the
appropriate fuel quantity. The air needed for combustions flows to the combustion chamber in a
controlled manner. The gas burns in the combustion chamber and the connected flue gas
discharge units, and transmits its energy to the environment.
At the ends of the hot gas passages, an exhaust fan can be found that safely conducts the
outlet gases to the chimney as appropriate for the quantity of fuel and volume of combustion air.
The operator is required to clear the ash and cinder from the combustion chamber at regular
intervals. The inspection window shall also be cleaned from the deposited ash, which is always
generated when solid fuels are burnt. The hot gas passages also have to be maintained
regularly. It needs to be carried by a specialized company.
Solid fuels naturally leave soot behind, and therefore the contamination of the inspection
window cannot be fully avoided, but it does not represent any deficiency.
Before being installed in the residential spaces, boilers have to be planned, reviewed and
authorized. For burning, the inflow of a sufficient volume of oxygen needs to be ensured. For
this reason, boilers can be operated with air engineering equipment – such as vapour
exhausters, ventilation equipment or pneumatic conveyors used for the carriage of wood pellet
– only under specific conditions. Consult any associated issue with the locally competent
chimney sweeping company or specialized contractor.