WAM WATERMIZER 3330 Скачать руководство пользователя страница 41

Страница: 41 / 75

308.708.8185 | [email protected] | Rev. 08/21

MAIN INDEX

PARTS INDEX

• DO follow all safety precautions in this manual.

• DO locate and familiarize yourself with the various Safety Signs and instructional decals prior to operation.

• DO inspect equipment for damage and wear before use; repair as needed.

• DO use caution when connecting pressurized systems, such as hydraulics and pneumatics.

• DO follow recommend maintenance.

• DO level the toolbar for optimum performance.

• DO lift implements completely out of the soil before turning the unit.

• DO use caution when moving large equipment. Using a spotter is recommended when working

around obstacles on the ground and/or overhead.

• DON’T fold the toolbar with locking pins in the locked position.

• DON’T over-pressurize the hydraulic system; Watermizer hydraulics are designed for 3,000 PSI MAX

working pressure.

• DON’T exceed the limits of a piece of machinery.

• DON’T modify equipment from factory build; modification may compromise equipment safety and integrity

and will void product warranty.

WATERMIZER DO’S AND DON’TS

OPERATION

Содержание WATERMIZER 3330












































































Результаты поиска

Содержание WATERMIZER 3330

Отзывы:

Похожие инструкции для WATERMIZER 3330

Бренды по названию

Популярные бренды

WAM WATERMIZER 3330, Руководство пользователя

Результаты поиска

Содержание WATERMIZER 3330

Отзывы:

Похожие инструкции для WATERMIZER 3330

Бренды по названию

Популярные бренды