WAM WATERMIZER 3330 Скачать руководство пользователя страница 4

Страница: 4 / 75

MAIN INDEX

PARTS INDEX

308.708.8185 | [email protected] | Rev. 08/21

DELIVERY CHECKLIST

Check Watermizer performance with retail customer/end user.

Review importance of proper maintenance and adherence to all safety precautions with retail customer/

end user.

Check for parts that may need to be adjusted or replaced.

Check all safety decals, reflective decals, and SMV sign are correctly located as shown in the Parts Guide and

that decals are legible. Replace if damaged or missing.

Check that safety/warning lights are properly installed.

Use the following checklist after your Watermizer is delivered as a reminder of very important information

which should be conveyed to retail customer/end user. Check off each item as it is fully explained.

(Signature Of Set-Up Person/Dealer Name/Date)

Life expectancy of this or any other machine is dependent on regular lubrication as directed in the Owner’s Manual.

All applicable safety precautions.

Along with retail customer/end user, check reflective decals and SMV sign are clearly visible with Level

Bander in transport position and attached to tractor. Check safety/warning lights are in working condition.

Tell retail customer/end user to check federal, state/provincial, and local regulations before towing or

transporting on a road or highway.

Give Owner’s Manual and all Instruction Sheets to retail customer/end user and explain all operating adjustments.

Read warranty to retail customer/end user.

Complete Warranty and Delivery Report form.

To the best of my knowledge, this machine has been delivered ready for field use and customer has been fully informed

as to proper care and operation.

(Signature Of Set-Up Person/Dealer Name/Date)

AFTER DELIVERY CHECKLIST

The following is a list of items we suggest to check during the first season of use of the equipment.

All registrations must be submitted to:

W&A Manufacturing

PO Box 5238

Pine Bluff, AR 71611

All registrations must be submitted to

W&A Manufacturing within 5 business

days of delivery. Retain a copy of this

form for auditing purposes.

Содержание WATERMIZER 3330












































































Результаты поиска

Содержание WATERMIZER 3330

Отзывы:

Похожие инструкции для WATERMIZER 3330

Бренды по названию

Популярные бренды

WAM WATERMIZER 3330, Руководство пользователя

Результаты поиска

Содержание WATERMIZER 3330

Отзывы:

Похожие инструкции для WATERMIZER 3330

Бренды по названию

Популярные бренды