WALTIS VIVA GT 25, Инструкция по эксплуатации

Страница: 11 / 43

VALTIS OGREVANJE d.o.o.
9
PRODUCT
DESCRIPTION
Viva
GT
3. PRODUCT DESCRIPTION
1.
Fume extraction duct
2.
Combustion chamber
3.
Loading bay door
4.
Ash cleanout doors
5.
Smoke chamber cover
6.
Firewood storage
7.
Belimo air intake motors
8.
Boiler heat exchanger
9.
Fan
10.
Chimney connection
11.
Electronic regulation
3.1 Basic description
The firewood is loaded into the boiler in the loading bay through the loading door.
The firewood is ignited through the loading door, and the ash left in the firewood
storage after burning is also cleaned here.
The ash cleaning door is used to clean or remove ash from the combustion chamber.
The air supply regulators operate automatically, the primary one ensuring a stable
combustion output and the secondary one, with the help of a lambda cell, supplying oxygen
to the flame itself in order to minimise the necessary excess of oxygen in the exhaust to the
environment.
The turbulators in the heat exchanger are used to clean the exchanger and are
operated by a handle located on the left side of the boiler.
3.2 Fuel
The fuel used in the boiler must be firewood with a maximum length of 500 mm
and an average diameter of 10 cm. Round pieces of wood smaller than 8 cm are not
split, but can be placed between the firewood. All types of wood with a maximum
moisture content of 18% can be burned. The boiler output is determined by the type and
dryness of the firewood.
10
11
5
9
3
6
7
1
8
2
4