Rev. 1.4
Assembly Instructions - Micro Point Pulse Valve MPP-SPEED
Page 5 of 17
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
2.4 Correct Use
This device is a needle valve suitable for the processing of sprayable media in continuous as well as inter-
mittent use. It is not suitable for spraying aggressive fluids such as acids, alkaline solutions, cleaning agents,
chemicals, etc. In case of doubt, please contact the manufacturer.
2.5 Incorrect Use
Operating the device with insufficient knowledge about the operation, maintenance and care of the
device.
Making changes, extensions or alterations on the device that may hamper its safety without the prior
consent of Walther Systemtechnik GmbH.
Operating the device with defective safety installations or not properly attached or malfunctioning
safety devices.
Using unsuitable materials.
Handling the device while energized.
2.6 Qualification of Personnel
Only trained and instructed personnel may conduct work on the equipment.
The responsibilities of the personnel for assembly work, operation, repair work or maintenance work must be
clearly assigned to individuals!
Persons in training may work with the equipment under supervision of an experienced person only.
Personnel
Task
Trained
Personnel
Personnel with technical
qualification
Specialist Supervisor
Packaging, Transport
X
-
-
-
Commissioning
X
X
-
Operation
X
-
Troubleshooting, general
X
X
-
Troubleshooting,
mechanical
-
X
-
-
Troubleshooting, electrical
-
-
X
-
Setting up
-
X
-
-
Maintenance
-
X
-
-
Repair
-
X
X
-
Taking out of service,
Storage
-
X
X
-
