Rev. 1.4
Assembly Instructions - Micro Point Pulse Valve MPP-SPEED
Page 8 of 17
Walther Systemtechnik GmbH
– D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de
4.4 Type Label
The type designation has been lasered near the material connection. Also the serial number has been
marked in this area.
5 Installation and Initial Start-up
The valves can be installed in any position. The distance to the surface to be applied with the medium
depends on the spray pattern.
Vibrations of the valve caused by fast intermitting cycles require solid and tight installation. Machine vibra-
tions to the valves should be avoided.
5.1 Hose Connection
The material hose will be connected as follows:
The connection for the material will be de-
termined with the actual order (screw con-
nection can be ordered separately as ac-
cessories)
5.2 Interfaces
Connection for material hose
Connection for material hose
Connection for electronic
plug
Fastening thread (see
technical drawing)
