Walter NFQ2020A, Руководство по эксплуатации

Страница: 31 / 56

GB
31
COMPRESSOR
CAUTION!
- Check tyre pressure using a calibrated pressure gauge at the nearest petrol
station or car workshop immediately after inflating your car tyres.
- Do not over inflate your tyres! – Follow the tyre manufacturer’s instructions.
- The compressor is designed for light applications. It is essential that you
operate the compressor in accordance with the duty cycle - 10 MINS ON – THEN
COOL DOWN.
- Keep the compressor out of the reach of children.
Instructions for use
- Always read and follow the inflation
instructions provided by the manufacturer
of the object you with to inflate.
- Unclip the air hose from the device's rear
housing. Connect the hose with the object
you wish to inflate. If necessary, use one of
the adapters stored in the accessory
compartment at the rear of the device.
- Move the lever on the hose valve
downwards to lock the valve in place.
- Switch on the compressor by putting the
main switch and the compressor switch
located on the front of the jump start in the
ON position.
- Hold the hose firmly on the appropriate
place and monitor the pressure gauge (5) on
the compressor until the desired pressure
is reached. Switch the compressor OFF
when the desired pressure is reached.
- Remove the hose from the inflated object.
Note: The compressor is powered by
the internal battery. The device must be
recharged after use or after long periods
of storage.
640045_Anleitung_D,GB,SLO:PRINT 14.03.2016 8:34 Uhr Seite 31