Walter NFQ2020A, Руководство по эксплуатации

Страница: 30 / 56

GB
30
WORK LIGHTS AND FLASHING LIGHTS
The machine is equipped with two work lights and two flashing lights.
Work / Flashing lights
- To turn the flashing lights ON, put the main
switch in the ON position and the light switch
in the middle (=) position.
- To turn the work lights on, put the main switch
in the ON position and the light switch in the
(-) position.
- To turn the work or flashing lights OFF, return
the switches to the OFF position.
Changing the bulbs
The machine is supplied with four replacement bulbs, two for the work lights and two for the
flashing lights. Proceed as follows to change the bulbs:
Flashing lights
- Ensure that all the switches are turned off.
- Gently squeeze the lamp cover at the top
and bottom as illustrated to remove it.
- Remove the broken bulb and install the
new one.
- Replace the lamp cover.
Light
Large replacement bulb
= flashing lights
Work lights
- Ensure that all the switches are turned off.
- Remove the Phillips screws using a Phillips
screwdriver and remove the lamp covers as
illustrated.
- Remove the broken bulb and install the
new one.
- Replace the lamp cover.
Small replacement bulb
= work lights
640045_Anleitung_D,GB,SLO:PRINT 14.03.2016 8:34 Uhr Seite 30