Walter AGW-180E, Руководство по эксплуатации, Страница: 39 / 136

39
GB
(for example asbestos).
• Do not let the petrol pressure washer run without spraying for more than two minutes.
• Keep a distance of 30 cm when cleaning vehicle tyres or tyre valves. The high pressure
jet may cause damaged tyres or tyre valves to burst.
• Keep a distance of at least 30 cm when cleaning painted surfaces to avoid damage to the
paintwork.
• To prevent the risk of burns do not touch the engine, pump or exhaust. These parts
become extremely hot during operation.
• Ensure that the pressure hose does not come into contact with hot surfaces. Beschädigte
Hochdruckschläuche können platzen und schwere Verletzungen verursachen.
• Stay clear of moving parts during operation.
• Oily waste water is considered an environmental hazard. Only clean objects which
produce oily waste water (engines, vehicle underbodies) at locations with an oil separator.
• Ensure that the petrol pressure washer is standing level on a flat, solid surface.
SAFETY WARNINGS FOR THE OPERATION OF THE PETROL ENGINE
• Do not start the engine without the silencer.
• The silencer must be inspected, cleaned and replaced at regular intervals.
• Do not run the engine without an air filter fitted.
• Do not make any adjustments to manipulate the engine speed.
• Incorrect fuels shall not be used as they may prove hazardous.
• The engine is designed for use with unleaded petrol. Never use other fuels.
FIRE HAZARD
• To prevent overheating of the engine keep a distance of at least one metre from buildings
or other objects when operating the petrol pressure washer.
• Ensure that the surrounding area is free from flammable materials or objects that can be
damaged by heat.
• The extreme flammability and potential explosiveness of petrol and its fumes must be
considered in all assessment of risk by the operator.
• The engine must be OFF when refilling the tank.
• Refill the tank away from all sources of direct or convectional heat.
• Refill the tank only in well ventilated areas.
• Do not overfill the tank.
• Do not smoke or allow flames or sparks where the petrol pressure washer is refuelled or
the fuel is stored.
• Do not start the engine if there is a fuel spillage. Spillages must be wiped away
immediately and the petrol pressure washer allowed to dry out completely before starting
the engine.
• Parts of the petrol pressure washer become extremely hot during operation. Keep a safe
distance of at least one metre from buildings, other objects or flammable materials when
working with the petrol pressure washer.
• Let the petrol pressure washer cool down completely before storage.