Walter AGW-180E, Руководство по эксплуатации

Страница: 62 / 136

62
GB
Cleaning nozzles
Nozzles can become clogged with dirt or debris resulting in excess pressure. This excess
pressure can be the cause of a pulsating spray pattern. Inspect and clean the nozzle
immediately.
Water inlet filter
• Inspect and clean the water inlet filter
screen periodically.
• Turn the machine off.
• Release all remaining pressure from the gun by
pulling the trigger.
• Remove the nozzle as described above.
• Carefully remove any debris with the nozzle
cleaning needle under running water.
Storage
• To prevent the risk of burns do not touch the engine, pump or exhaust. These
parts become extremely hot during operation.
• Let the petrol pressure washer cool down completely before storage.
Cleaning the petrol pressure washer
• Inspect the petrol pressure washer for signs of oil leakage before every use.
• Be sure to keep all connections, springs and engine controls clean.
• Clean engine components reduce the risk of overheating and ignition of accumulated
debris.
• Keep all inlets and outlets clean and unobstructed.
• Use a damp cloth to wipe exterior surfaces.
• Use a soft brush to brush of accumulated dirt or residue.
• Use a vacuum cleaner to lift off any loose dirt and debris.